[j-nsp] ssh (cli?) differences in 6.4R2.

[Jeff Wheeler]

On Tue, 2004-11-16 at 02:36, Igor Gashinsky wrote:
> 	I ran into this exact issue as well, and according to juniper 
> that's the way it will work from this point on (previous behavior was 
> broken). To get multi-commands to work via ssh, do this:

Note that the cli is invoked for "regular users" based on the shell
configured in /etc/passwd.  If you felt like being non-standard, you
could simply change the user's shell back to /usr/sbin/cli.

-- 
Jeff at Reflected Networks