[j-nsp] Channelized CT3 card able to Clear Channel?

[Dan Benson]

Hello, I have ample quanities of the juniper CT3 cards and was wondering 
if anyone has been able to configure these card to run clear channel 
over the DS3 ports.  At this point I have tried extensivly to generate a 
config that would allow for this, but have been totally unsecussfull.  
Any ideas or insight?  Thanks ahead for the help.. //db

This is what I have some up with, based on my experiance with the coc12 
cards:

    ct3-0/0/0 {
        no-partition interface-type t3;
    }
    t3-0/0/0 {
        encapsulation cisco-hdlc;
        t3-options {
            compatibility-mode digital-link subrate 44.2Mb;
        }
        unit 0 {
            family inet {
                address 192.168.200.2/24;
            }
        }
    }