[j-nsp] PB-4GE-SX

[Jack.W.Parks at alltel.com]

That should be 12.8 Full-duplex (M160) or 16G (M320), or by another
vendor's math 25.6Gig.  You should be able to install 12 GE interfaces
per FPC2 (M160) or 16 GE interfaces per FPC2 (M320) without blocking on
the midplane.

Check http://www.juniper.net/products/mseries/100042.html#04 for more
specs.

Jack

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Robert J.
Adams (jason)
Sent: Tuesday, October 12, 2004 2:28 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] PB-4GE-SX



Hello,

Are the PB-4GE-SX able to do line rate? I'm asking because they use a 
FPC2, which is only 12.8Gig/fpc ..is the 12.8G divided equally between 4

PICS or can a single PIC use 4G of the 12.8?

Thanks,
Jason
SISCOM
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
******************************************************************************************
The information contained in this message, including attachments, may contain 
privileged or confidential information that is intended to be delivered only to the 
person identified above. If you are not the intended recipient, or the person 
responsible for delivering this message to the intended recipient, ALLTEL requests 
that you immediately notify the sender and asks that you do not read the message or its 
attachments, and that you delete them without copying or sending them to anyone else.