[j-nsp] M5 & CHDS3-QPP

[Dan Evans]

Can you paste in the output of 'show chassis hardware'. Do you have
any ATM2 pic's in the router by chance? I'd also check the syslog
messages for anything related to this issue.

-Dan 

On Apr 5, 2005 5:31 PM, Khawaja, Kashif <Kashif.Khawaja at broadwing.com> wrote:
> Don't have the output for it, though, my NOC tells me there werent any
> errors (incrementing) at all at layer 1, layer 2 was down and hence
> layer 3 down as well. I'll run with this tomorrow and see if I notice
> anything out of the ordinary. Thanks guys!
> 
> 
> -----Original Message-----
> From: Dan Evans [mailto:pzdevans at gmail.com]
> Sent: Tuesday, April 05, 2005 4:01 PM
> To: Khawaja, Kashif
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] M5 & CHDS3-QPP
> 
> I don't see anything out of place in the config. What are you seeing in
> the 'show interface t1-x/x/y extensive' outputs? Where are the problems?
> Layer 1, 2, 3? Do you have any other mlppp bundles that are working that
> aren't using an IQ CHDS3 PIC?
> 
> -Dan
> 
>