[j-nsp] Hub&Spoke where the traffic must pass the ce

[E.T.Metz at telecom.tno.nl]

Considering you have a single PE situation, do you have separate VRFs
for the sites, or are all associated with the same VRF? With separate
VRFs and proper import/export policies should come a long way.

cheers,
	Eduard

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Henrik Hansson
> Sent: dinsdag 19 april 2005 11:22
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Hub&Spoke where the traffic must pass the ce
> 
> 
> Hi all, 
> Have some one been able to accomplice this in one PE router.
> What I would like to is what is described in this. 
> (http://www.juniper.net/techpubs/software/junos/junos64/swconf
> ig64-vpns/frameset.htm)
> 
> The different between this example and mine is that all of 
> this is one PE.
> I have tried auto-export without any success .
> 
> Is the only way to accomplice this RIB-groups?
> 
> Best Regards,
> Henrik
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>