[j-nsp] (no subject)

[Erdem Sener]

Hi,

 You should specify the filename on [edit interfaces] section. You can
also enable
general flags here, or insert additional/different flags for individual
interfaces.

 Cheers,
 Erdem

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of S B
> Sent: Monday, April 25, 2005 5:31 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] (no subject)
> 
> Hi ,
> 
> I have a problem with debugging in JUNOS .
> 
> I set traceoptions flag all for an e1 interface in m10i 
> router.Usually when I want to see traces online I set 
> traceoptions file  then I operate monitor start file_name 
> command.However traceoptions file file_name  command does not 
> work for  the interface.How could I see the traceoptions log 
> online  for e1 interfaces .??
> 
> cheers.
> SB
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 


UYARI/NOTIFICATION:
***************************************************************************
Bu e-posta ve ekleri sadece gonderilen adres sahiplerine aittir. Bu mesajin yanlislikla tarafiniza ulasmis olmasi halinde, lutfen gondericiye derhal bilgi veriniz ve mesaji sisteminizden siliniz. BORUSAN TELEKOM bu mesajin icerigi ve ekleri ile ilgili olarak hukuksal hicbir sorumluluk kabul etmez.  Gonderen taraf hata veya unutmalardan sorumluluk kabul etmez.

The information contained in this e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed.If you received this message in error, please immediately notify the sender and delete it from your system.BORUSAN TELEKOM doesn't accept any legal responsibility for the contents and attachments of this message.The sender does not accept liability for any errors or omissions.

***************************************************************************