[j-nsp] ftp using loopback IP

Selçuk Kardeş selcuk.kardes at turktelekom.com.tr
Thu Apr 28 01:46:09 EDT 2005


my problem was solved by using

system {
    default-address-selection;
}

thanks
Selçuk






Koh-ichi Ito yazmış:

>At Wed, 27 Apr 2005 07:38:32 -0500,
>Jody Holmes wrote:
>  
>
>>>there is no problem to copy juniper.conf.1.gz file to remote system.
>>>i wonder , is it possible to use my router loopback IP instead of my 
>>>interface IP ?
>>>      
>>>
>>It should use your loopback by default (did for my quick test just now)
>>    
>>
>
>It depends wheather your config has
>
>system {
>    default-address-selection;
>}
>
>or not, doesn't it?
>
>						Koh-ichi Ito
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp
>
>  
>


More information about the juniper-nsp mailing list