[j-nsp] forwarding traffic between VRFs

Bosco.Sachanandani at orange.co.in Bosco.Sachanandani at orange.co.in
Fri Apr 29 00:50:27 EDT 2005


Yes, I had tried this earlier and it does not give me errors, but I presume this is true only for the FORWARD path. What about to the reverse routes ? I am using Junos 6.4


[edit routing-instances CorpX_VRF]

instance-type vrf;
interface gr-1/0/0.2;
route-distinguisher 65010:08;
vrf-import CorpX_import;
vrf-export CorpX_export;
routing-options {
    static {
        route 10.12.17.64/26 next-hop 10.11.210.81;
        route 10.1.8.0/24 next-table CorpY_VRF.inet.0;
    }
}

[edit routing-instances CorpX_VRF]
boscos at srmum1-re0# 


COMMIT SUCCEEDS AT THIS POINT



[edit routing-instances CorpY_VRF]

instance-type vrf;
interface ds-0/1/1:0.0;
interface gr-0/0/0.0;
inactive: interface fe-1/3/3.0;
route-distinguisher 65010:06;
vrf-import reject-all;
vrf-export reject-all;
routing-options {
    static {
        route 10.12.16.0/26 next-hop 10.11.210.1;
        route 0.0.0.0/0 next-hop 10.11.207.2;
        route 10.12.17.64/26 next-table CorpX_VRF.inet.0;
    }
}


COMMIT FAILS HERE


error: [rib CorpX_VRF.inet.0 routing-options static]
    next-table may loop
error: configuration check-out failed
  

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Krasimir Avramski
Sent: Thursday, April 28, 2005 9:16 PM
To: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] forwarding traffic between VRFs


Hi,

Beginning with junos 6.4R2 ( 7.1 for sure ) it is possile to use something like this:

CorpX {
    routing-options {
        static {
            route 10.1.8.0/24 next-table CorpY.inet.0;
        }
    }
}

Krasi

------------------------------------------------------------------------



---Original Message----------------------------------
 FROM: Bosco.Sachanandani at orange.co.in
 TO: juniper-nsp at puck.nether.net
 SUBJECT: Re: [j-nsp] forwarding traffic between VRFs
 SENT: APRIL 28, 2005 07:28PM
--------------------------------------------------------
> 
> Hello Folks, I was reading through 'Layer 3 VPN Configuration Examples' herehttp://www.juniper.net/techpubs/software/junos/junos64/swconfig64-vpns/frameset.htm but could not come up with a solution.
> The requirement is "fairly" simple:
> 2 separate L3 VPNs CorpX and CorpY configured on 2 PE routers at 
> 2separate geographically dispersed locations. Static routes used to routepackets towards the CPE. The local leased lines connected for CorpX and are part of their respective VRFs (LL for CorpX is part ofCorpX_VRF) and not part of inet.0 The requirement is to "mix" traffic for a particular subnet 10.1.8.0/24between the 2VRFs i.e. at CorpX's ingress interface, a filter for anygiven subnet, should hop all traffic for 10.1.8.0/24 into CorpY_VRF anduse the default route in CorpY_VRF to go on upstream.
> The problem here is that filter-based forwarding works only if theinterface (CorpX's ingress interface) lies in inet.0, which is notapplicable in my setup.
> Excerpt from the documentation:
> " For this configuration to work, the following must be true:
> 1) The interfaces that use filter-based forwarding must not be bound tothe VPN. 	2) Static routing must be used as the means of routing. 	3) You must define an interface routing table group that is shared amonginet.0 and the VRFs to provide local routes to the VRF. "
> 
> Points 2 and 3 can be expedited but point 1 remains a constraint forwhich I cannot figure out a workaround.
> Following this 
> linkhttp://boulder.noaa.gov/noc/juniper/software/junos54/swconfig54-vpns/html/vpnl3-examples43.html also talks about importing routes from inet.0 Configure the routing options as follows:
> [edit]
> routing-options {
>     rib-groups {
>         inet-access {
>             import-rib inet.0;
>         }
>     }
> }
> 
> Would be great is someone can provide any pointers for a workaround.
> Thanks
> 
> 
> “The information in this message is confidential and may be legally 
> privileged. It is intended solely for the addressee.  Access to this 
> message by anyone else is unauthorized.  If you are not the intended 
> recipient, any disclosure, copying, or distribution of the message, or 
> any action or omission taken by you in reliance on it, is prohibited 
> and may be unlawful.  Please immediately contact the sender if you 
> have received this message in error. Thank you. Hutchison Max Telecom 
> Limited.” _______________________________________________juniper-nsp 
> mailing list 
> juniper-nsp at puck.nether.nethttp://puck.nether.net/mailman/listinfo/jun
> iper-nsp
> 
> 
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net http://puck.nether.net/mailman/listinfo/juniper-nsp


“The information in this message is confidential and may be legally privileged. It is intended solely for the addressee.  Access to this message by anyone else is unauthorized.  If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful.  Please immediately contact the sender if you have received this message in error. Thank you. Hutchison Max Telecom Limited.” 



More information about the juniper-nsp mailing list