[j-nsp] CBTS-like functionality under JUNOS?

Andrew Ramsey akramsey at juniper.net
Fri Aug 5 16:12:47 EDT 2005


Hi,

Looks like diffserv-TE
http://www.juniper.net/techpubs/software/junos/junos73/swconfig73-mpls-a
pps/html/mpls-diffserv-config.html

Andy

>-----Original Message-----
>From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
>bounces at puck.nether.net] On Behalf Of Aaron Daubman
>Sent: Friday, August 05, 2005 3:55 PM
>To: cisco-nsp; juniper-nsp
>Subject: [j-nsp] CBTS-like functionality under JUNOS?
>
>Greetings,
>
>I'm looking to set up a 4-5 node MPLS-TE mesh consisting (for now) of
>two M320s and two GSR 12410s.  Where I'm getting stuck is in trying to
>find a Class-Based Tunnel Selection equivalent under JUNOS.
>
>(CBTS:
>http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature
_gui
>de09186a00802659b9.html
>)
>
>Is this functionality (or something similar) available from Juniper?
>
>(note, CoS-Based Forwarding will _not_ suffice
>CBF: http://www.juniper.net/techpubs/software/junos/junos61/swconfig61-
>interfaces/html/cos-config17.html
>)
>
>Thanks for any info/hints/suggestions =)
>     ~Aaron
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list