[j-nsp] Copy Files to TFTP Server

[Andrew Ramsey]

Hi,

Also, you could use the following config to automate pushing the
configs:

lab at M7i-R100# set system archival configuration ?
Possible completions:
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these
groups
> archive-sites        
  transfer-interval    Frequency at which file transfer happens
(15..2880 minutes)
  transfer-on-commit   Transfer after each commit
[edit]
lab at M7i-R100# set system archival configuration

Thanks,
Andy

>-----Original Message-----
>From: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-
>bounces at puck.nether.net] On Behalf Of michael.firth at bt.com
>Sent: Wednesday, August 31, 2005 4:57 AM
>To: jeff_richmond at eli.net; akella_srikant at yahoo.co.in; juniper-
>nsp at puck.nether.net
>Subject: RE: [j-nsp] Copy Files to TFTP Server
>
>Or the more PC/Unix like mode:
>
>ftp 10.3.1.38
>Login: username
>Password: password
>ftp> put <file name>
>ftp> bye
>
>JunOS also supports SCP and SFTP if you need/want the transfer
>encrypted.
>
>'run' is a standard command prefix to allow you to perform user mode
>commands while in edit configuration mode - e.g. while editing the
>config
>you can do 'run traceroute x.x.x.x' to check the route the router is
>currently using to reach x.x.x.x
>
>Regards
>
>Michael
>
>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net
>> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of
>> Richmond, Jeff (ELI)
>> Sent: 31 August 2005 08:57
>> To: A.V. Srikant; juniper-nsp at puck.nether.net
>> Subject: RE: [j-nsp] Copy Files to TFTP Server
>>
>>
>> file copy <File Name> ftp://username:password@10.3.1.38
>>
>> This is for FTP of course, not TFTP.
>>
>> Hth,
>> -Jeff
>>
>> -----Original Message-----
>> From: juniper-nsp-bounces at puck.nether.net
>> [mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of A.V. Srikant
>> Sent: Wednesday, August 31, 2005 12:01 AM
>> To: juniper-nsp at puck.nether.net
>> Subject: [j-nsp] Copy Files to TFTP Server
>>
>>
>> Hi All,
>>
>> I need to copy some of the Configuration files present in
>> Juniper M40e Router to some FTP Server. Can somebody help me
>> in giving the command for this ?
>>
>> I have tried the below options and it is not working.
>>
>> run file copy <File Name> ftp://10.3.1.38
>>
>> Here 10.3.1.38 is the FTP Server IP
>>
>> Thank you,
>>
>> Regards,
>> Srikant
>>
>>
>>
>>
>> ---------------------------------
>>  Too much spam in your inbox? Yahoo! Mail gives you the best
>> spam protection for FREE! http://in.mail.yahoo.com
>>
>> ---------------------------------
>>  Too much spam in your inbox? Yahoo! Mail gives you the best
>> spam protection for FREE! http://in.mail.yahoo.com
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/juniper-nsp