[j-nsp] HW for VPLS on M320

[Goldschmidt, Bernd]

It is also possible to use a ASP PB-AS2.

But you need additional HW. 

-Bernd.

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> George Yalamov
> Sent: Friday, December 16, 2005 9:31 AM
> To: Bo¹tjan Fele
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] HW for VPLS on M320
> 
> Boštjan Fele wrote:
> 
> > 
> >Hi,
> >
> >Trying to figure out required HW components for VPLS on 
> M320. Does M320 need a Tunnel PIC for VPLS service?
> >
> >Regards,
> >Bostjan Fele
> >
> >_______________________________________________
> >juniper-nsp mailing list juniper-nsp at puck.nether.net
> >http://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> >  
> >
> Hi,
> 
> Yes, for VPLS you need Tunnel Services PIC - PB-TUNNEL-1 only.
> 
> 
> Regards
> George
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>