[j-nsp] Etherchannel

[Erdem Sener]

 Hi,
 
  You can configure an aggregate interface and bundle ethernet 
 and/or sonet interfaces.
 
  In fact, JunOS does a pretty good job load balancing between 
 members of the bundle.
 
  For more information, you can check (careful with the for word wrap)
 
http://www.juniper.net/techpubs/software/junos/junos64/swconfig64-interf
aces/html/interfaces-ethernet-config54.html 

 
  Cheers,
  Erdem 
 
 > -----Original Message-----
 > From: juniper-nsp-bounces at puck.nether.net
 > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
 > Yastrebov V. 
 > Valery
 > Sent: Monday, February 07, 2005 3:59 PM
 > To: juniper-nsp at puck.nether.net
 > Subject: [j-nsp] Etherchannel
 > 
 > It's intresting is it possible to make etherchannel (to bind two or 
 > more Ethernet links in ligical one) on M or E-series ?
 > 
 > _______________________________________________
 > juniper-nsp mailing list juniper-nsp at puck.nether.net 
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > 
> 


UYARI/NOTIFICATION:
***************************************************************************
Bu e-posta ve ekleri sadece gonderilen adres sahiplerine aittir. Bu mesajin yanlislikla tarafiniza ulasmis olmasi halinde, lutfen gondericiye derhal bilgi veriniz ve mesaji sisteminizden siliniz. BORUSAN TELEKOM bu mesajin icerigi ve ekleri ile ilgili olarak hukuksal hicbir sorumluluk kabul etmez.  Gonderen taraf hata veya unutmalardan sorumluluk kabul etmez.

The information contained in this e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed.If you received this message in error, please immediately notify the sender and delete it from your system.BORUSAN TELEKOM doesn't accept any legal responsibility for the contents and attachments of this message.The sender does not accept liability for any errors or omissions.

***************************************************************************