[j-nsp] Memory Utilization of Juniper M5

[Eng Ivan]

Why don't you upgrade to 7.0R2.7 to see if that's the problem (6.4)

Are you limiting the number of telnet sessions on your router?

Ivan

-----Original Message-----
From: J Grewal [mailto:j.grewal at in.spectranet.com]
Sent: Martes, 15 de Febrero de 2005 05:19 a.m.
To: Paul Fraley
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Memory Utilization of Juniper M5


Dear Mr. Paul,

No we still living with the problem. It was working fine with older Junos 
but after changing the Junos the utilization shoot to 90%. Seems some 
problem with newer Junos , but we had to upgrade since there were some 
serious vulnerability issues with older Junos.

Hope there is some other solution to this problem then increasing the RAM.

Regards,

J.Grewal




----- Original Message ----- 
From: "Paul Fraley" <fraley at juniper.net>
To: "J Grewal" <j.grewal at in.spectranet.com>
Cc: <juniper-nsp at puck.nether.net>
Sent: Tuesday, February 15, 2005 1:59 AM
Subject: Re: [j-nsp] Memory Utilization of Juniper M5


>
>
> J Grewal wrote:
>> Dear All,
>>
>> Recently we have upgraded our Junos from 5.7(r2) to 6.4 . After this our 
>> memory utilization increased from 30% to 90% and also we are observing 
>> telnet sessions getting hanged and we unable to telnet the router.
>>
>> is there any solution to this problem.
>>
>> Regards,
>> JPS
>
> Does not ring a bell.  Did you find out what it was?
>
> Thanks,
> Paul
>
> 

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp