[j-nsp] RSVP error

[Per Ole Klemetsrud]

You probably have a cisco-cisco LSP, traversing a Juniper M. 
Cisco for some reason uses protocol and port 0 (at least on 12.2(18)S).

Do a "show ip rsvp sender" on the Cisco , and you will probably see Pro 
and DPort 0 - which is the cause of the log entry.  Annoying yes, but 
should not have any impact other than excessive logging on the Juniper.

=) PO

On Wed, 16 Feb 2005, Umar Ahmed wrote:

> Hi all,
>
> anyone know what in Burt Reynolds this means :
>
> Feb 14 11:12:19 RSVP error, rcv pkt port conflict Path 2.2.2.2->1.1.1.1
> Len=176 fe-0/0/0.0
>
> Thanks,
>
> Umar.
>
>
>
> **********************************************************************
> Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient.  If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.
>
> If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support at vanco.info
>
> The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail.
> **********************************************************************
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>