[j-nsp] M10 crashed

[Josef Buchsteiner]

Ivan,

     since you got NMI interrupt it is most likely a hardware problem
     and you might need to replace the RE. Please contact juniper
     support to conduct further investigation.

     thanks
     Josef

Tuesday, January 4, 2005, 10:43:50 PM, you wrote:

  
EI> I connected one M10 to a DS3 port and after that my M10 router sent me this
EI>  info and rebooted<?xml:namespace prefix = o ns =
EI>  "urn:schemas-microsoft-com:office:office" />



 M10>> panic: NMI indicates hardware failure

EI>  panic(c05ba960,c0423701,e4ee6fa0,c041d511,0) at panic+0x96

EI>  trap(bfbf002f,bfbf002f,bfbf002f,bfbfe158,8cea450) at trap+0x2e5

EI>  calltrap() at calltrap+0x11

EI>  --- trap 0x13, eip = 0x8121b76, esp = 0xbfbfe038, ebp = 0xbfbfe090 ---



EI>  syncing disks... 2

EI>  done

EI>  Uptime: 1d8h31m39s



EI>  Selective dump



EI>  dumping to dev rad1s1b, offset 3028840

EI>  ata0: resetting devices .. done

EI>  55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31
EI>  30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3
EI>  2 1 0 succeeded

EI>  ata0: Spinning down devices. Please wait...

EI>  Automatic reboot in 15 seconds - press a key on the console to abort

EI>  Rebooting...







EI>  checking for core dump...

EI>  savecore: Router crashed.....

EI>  savecore: reboot after panic: NMI indicates hardware failure





EI>  After that it worked fine for some hours and then it started to have some
EI>  routing problems. Does someone have any idea what caused it? or mean it? Now
EI>  I've it disconnected.



EI>  Thanks,



EI>  _______________________________________________
EI>  juniper-nsp mailing list juniper-nsp at puck.nether.net
EI> http://puck.nether.net/mailman/listinfo/juniper-nsp