[j-nsp] IPv6 support on ERX 4-port OC3/STM1 POS linecard?

[Daniel Roesen]

Hi,

http://www.juniper.net/techpubs/hardware/erx/junose60/hw-erx-module/pro-ocx-pos-48.html#pro-ocx-pos-48

This says that the OCx/STMx POS line cards with OC3-4 or OC12
I/O Modules do support IPv6 multicast, but _no_ "IPv6". This strikes
me... odd. What's the actual correct specification? Does it both
support IPv6 unicast and multicast, or only multicast?

On a seperate issue, IPv6 with FE-8 IO seems unsupported, but with GE IO
supported... is that really correct? I thought this is only a matter of
wether the line card is ASIC-based or not?


Best regards,
Daniel

-- 
CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0