[j-nsp] EIA 530 PIC
Jared Gull
jmgull at yahoo.com
Thu Jan 13 15:26:18 EST 2005
Sabah,
The EIA-530 PIC uses a DB25 connector. This is
documented on Juniper's website @ the following URL:
http://www.juniper.net/techpubs/hardware/m5-m10/m5-m10-pic/eia.html#eia
Hope this helps.
Jared Gull
--- Sabah uddin Ahmed <sabah at apollo.com.pk> wrote:
> Hi all,
>
>
>
> One client running on Cisco (RS 232 (DB 60) DCE) we
> can shift this link to
> Juniper M40e EIA 530 interface or not. Kindly
> confirm EIA530 interface
> support Rs232 or not.
>
> Is their any Cable reference guide of PIC EIA 530
> for cable configuration
> available on Juniper site?
>
>
>
> I think EIA530 does not support RS232 cable.
>
>
>
> Regards
>
> Sabah uddin Ahmed
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
__________________________________
Do you Yahoo!?
All your favorites on one personal page Try My Yahoo!
http://my.yahoo.com
More information about the juniper-nsp
mailing list