[j-nsp] Re: M5 - outbound load balancing

[David Gethings]

On 19 Jan 2005, at 20:31, Harry Reynolds wrote:

> For BGP you need to enable multipath to
> ensure that 1 set of routes are not selected based upon (lowest) Router
> ID alone
Please be aware that as of JUNOS 62.R2.4 the default is it use this  
IETF ID for the final tie breaker:

http://www.ietf.org/internet-drafts/draft-ietf-idr-avoid-transition 
-01.txt

At least this is what I have observed.

I'm not sure but I would imagine multipath would prevent this rule from  
being activated.

Cheers

Dg