[j-nsp] Radius CLI Accounting

[Thomas, Steven]

Junos may not do RADIUS CLI accounting, but it does do TACACS CLI
accounting.  Junose will do CLI accounting via syslog.

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Steve Holman
Sent: Thursday, July 28, 2005 6:31 PM
To: Scott Ehnert; juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] Radius CLI Accounting

It is currently not supported on JUNOS, but stay tuned.  Not sure about
JUNOSe.

Steve

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Scott Ehnert
> Sent: Thursday, July 28, 2005 4:15 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Radius CLI Accounting
> 
> 
> Hello,
> 
> I am trying to setup RADIUS accounting for all commands 
> issued at the CLI.  I am working with both JUNOS and JUNOSe.  
> Authentication is working fine.  It looks like the Accounting 
> functionality that I am looking for does not exist.  Can 
> someone verify that is the case, or if it is not that way, 
> can you point me in the right direction?
> 
> JUNOS [7.2R2.4]
> JUNOSe Version: 5.3.3
> 
> 
> Thank you,
> 
> -=Scott
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/junipe> r-nsp
> 

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp