[j-nsp] OSPF route flapping

Fri Jun 17 17:40:02 EDT 2005

Hi Harry, 
I forget attach the file with the trace done. It is attached now.

In fact, the LSA originating router has defined the static routes and its directly connected with M20 router.
At the way, the behavior is the same with another M20 router connected to this originating router. Its possible that problem is originated at this last. I will check it with more detail.Its a Summit48si.

Thanks for your help.

//Javier

-----Original Message-----
From: Harry Reynolds [mailto:harry at juniper.net]
Sent: Viernes, 17 de Junio de 2005 04:22 p.m.
To: Javier Gallardo (DF/TEM); Javier Gallardo Córdova
Cc: juniper-nsp at puck.nether.net
Subject: RE: [j-nsp] OSPF route flapping

It appears that a router, ostensibly the LSA originator, has opted to purge them. This is done by re-flooding with max age to flush them from the area's LSDB. In JUNOS software, a clear ospf database purge will cause that router to re-flood all LSAs, not just those that are self originated, with max age. 

I think you mentioned these were static routes. Any chance they may point to an interface/next-hop that is bouncing on the router the ASBR? Otherwise, need to locate the router that is flooding with max age (may not be the LSA originator, but should be) and go from there.

Cheers

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Javier Gallardo (DF/TEM)
> Sent: Friday, June 17, 2005 2:15 PM
> To: Javier Gallardo Córdova
> Cc: juniper-nsp at puck.nether.net
> Subject: RE: [j-nsp] OSPF route flapping
> 
> Hi Erdem,
> 
> I made a revison for physical link and it doesn´t flap. I 
> check with ping to Summmit interfase.
> 
> No, I activate the traceoptions with "flag packets detail" 
> and the output is in the attached file.
> 
> Do you know why appears the states QUIET->QUIET , 
> QUIET->PURGE_PENDING.
> 
> Too, from the next printouts (taken with brief difference 
> time), I saw the Age changes abruptly to 3600 from  a value 
> lower to 7. 
> 
> M20# show ospf database advertising-router 0.164.219.227 extern 
>  Type       ID               Adv Rtr           Seq      Age  
> Opt  Cksum  Len
> Extern   13.52.120.64     0.164.219.227    0x802ec970     2  
> 0x2  0xe7bc  36
> 
> Extern   13.52.120.64     0.164.219.227    0x802ec96e  3600  
> 0x2  0xebba  36
> 
> I´ll appreciate your comments.
> 
> Thanks and regards.
> 
> //Javier
> 
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net]
> Sent: Viernes, 17 de Junio de 2005 02:54 p.m.
> To: Javier Gallardo Córdova
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] OSPF route flapping
> 
> 
> Hi,
> 
>  I might be re-stating the obvious but are you sure the 
> physical links don't flap?
> Otherwise, it might be an MTU issue, maybe.
> 
>  You can turn on ospf traceoptions with something like;
> 
> traceoptions {
> flag packets detail;
>     flag database-description detail;
>     flag error detail;
> }
> 
>  Cheers,
>  Erdem
> On 6/17/05, Javier Gallardo Córdova <jagc64 at yahoo.com> wrote:
> > Hi,
> > 
> > I have the next behavior at M20 route table for several 
> statics routes announced by a Summit48si via OSPF.
> > Jun 17 12:42:33 RELEASE  13.52.120.64/30    gw 192.168.2.50 
>    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Release Int Ext>
> > Jun 17 12:42:33 ADD      13.52.120.64/30    gw 192.168.2.50 
>    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Int Ext>
> > Jun 17 12:42:43 RELEASE  13.52.120.64/30    gw 192.168.2.50 
>    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Release Int Ext>
> > Jun 17 12:42:43 ADD      13.52.120.64/30    gw 192.168.2.50 
>    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Int Ext>
> > Jun 17 12:42:53 RELEASE  13.52.120.64/30    gw 192.168.2.50 
>    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Release Int Ext>
> > Jun 17 12:42:53 ADD      13.52.120.64/30    gw 192.168.2.50 
>    OSPF     pref 150/0 metric 7/0 fe-0/1/2.0 <Int Ext>
> > 
> > Someone know why is the route flapping with 10 seconds period?.
> > 
> > Thanks and regards.
> > //Javier
> > 
> > __________________________________________________
> > Correo Yahoo!
> > Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
> > Regístrate ya - http://correo.espanol.yahoo.com/ 
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net 
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 