[j-nsp] Strange xntpd log messages

[Jee Kay]

On 6/23/05, Harry Reynolds <harry at juniper.net> wrote:
> You might try adding a non-martian address to the loopback interface.
> Xntpd should bind to that IP and stop logging errors. I expect you may
> have to restart routing (or at minimum the xntpd) for the change to take
> effect.

The loopback is in publically routable address space. There are no
martians in any part of the configuration. (The router has been
through a full reboot since the addition of the Lo interface)