[j-nsp] Strange xntpd log messages

Thomas, Steven SThomas at birch.com
Thu Jun 23 09:39:25 EDT 2005


I have 4 m10is, all configured essentially identically.  All have legal
public addresses on the loopback interface.  Only one gives out this
message. I'll be happy to hear any resolution to this issue.

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Jee Kay
Sent: Thursday, June 23, 2005 8:20 AM
To: Harry Reynolds
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Strange xntpd log messages


On 6/23/05, Harry Reynolds <harry at juniper.net> wrote:
> You might try adding a non-martian address to the loopback interface.
> Xntpd should bind to that IP and stop logging errors. I expect you may
> have to restart routing (or at minimum the xntpd) for the change to
take
> effect.

The loopback is in publically routable address space. There are no
martians in any part of the configuration. (The router has been
through a full reboot since the addition of the Lo interface)

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list