[j-nsp] How to debug if the state of OSPF neighbor is ExStart onM20

[Scott Morris]

Depending on which L3 switch/IOS we're talking about, it's probably because
the system mtu is defaulting to 1518 on the Cisco side.  Change ip mtu on
the Cisco interface to 1500 and life should be good.

Scott
 

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Eric Shih (TP/ERT)
Sent: Tuesday, March 01, 2005 1:27 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] How to debug if the state of OSPF neighbor is ExStart onM20


Hello all

   Could someone tell me what shoud I do if the state of OSPF neighbor is
ExStart on M20 ? The neighbor is Cisco L3 switch. Is it related to MTU size
of the interface ? If it is, to what value should I modify ?
Thanks fo your support !!



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp