[j-nsp] BGP load balancing with Cisco

Javier Gallardo Córdova jagc64 at yahoo.com
Tue Mar 8 23:34:22 EST 2005

We need to connect a M20 with two E3 I/F with a CISCO router with BGP. We want to do a load balancing between those two links.
The Cisco guy (from ISP) give me this configuration:
 neighbor remote-as 13440 
neighbor description SAT

neighbor soft-reconfiguration inbound

neighbor distribute-list 164 in

neighbor route-map PEER-P-UUMTYSAT-B-UUTORSAT in

neighbor route-map export-customer-routes out


neighbor ebgp-multihop 2

neighbor update-source loopback


Can someone help me to configure the M20 to connect to Cisco with this config?

I´ll appreciate a lot your help.




Javier Gallardo

Do You Yahoo!?
Todo lo que quieres saber de Estados Unidos, América Latina y el resto del Mundo.
Visíta Yahoo! Noticias.

More information about the juniper-nsp mailing list