[j-nsp] CFEB crash/reboot on M7i

[Sabri Berisha]

On Mon, May 02, 2005 at 11:13:17AM +0300, Juha Suhonen wrote:

Hi,

> May  1 22:17:58  core-r1.tre1 cfeb System Exception: Vector/Code 0x00700, Signal 4
> May  1 22:17:58  core-r1.tre1 cfeb Event occurred at: May  1 22:17:58.276457
> May  1 22:17:58  core-r1.tre1 cfeb Juniper Embedded Microkernel Version 7.1R1.3
> May  1 22:17:58  core-r1.tre1 cfeb Built by builder on 2005-02-11 04:16:18 UTC
> May  1 22:17:58  core-r1.tre1 cfeb Copyright (C) 1998-2005, Juniper Networks, Inc.
> May  1 22:17:58  core-r1.tre1 cfeb All rights reserved.
> May  1 22:17:58  core-r1.tre1 cfeb Reason string: "Illegal instruction"
> May  1 22:17:58  core-r1.tre1 cfeb Context: Thread (Idle)
> May  1 22:17:58  core-r1.tre1 cfeb Registers:

One of my conucollegues saw sort of the same on his m7i last week:

>> System Exception: Vector/Code 0x00700, Signal 4 
>> Event occurred at: Apr 23 18:38:34.967273 
>> 
>> Juniper Embedded Microkernel Version 7.1R1.3 
>> Built by builder on 2005-02-11 04:16:18 UTC
>> Copyright (C) 1998-2005, Juniper Networks, Inc. 
>> All rights reserved. 
>> Reason string: "Illegal instruction"
>> Context: Thread (Idle)

If you start a shell, su to root and type:

vty cfeb

and type:

show nvram

you get a bit more info.

-- 
Sabri Berisha,
Juniper Certified - JNCIA #747	| Cisco Certified - CCNA
email: sabri at cluecentral.net	| cell: +31 6 19890416
http://www.cluecentral.net/	| http://www.virt-ix.net/