[j-nsp] FE Memory Upgrade
Hannes Gredler
hannes at juniper.net
Wed May 11 05:03:30 EDT 2005
On Tue, May 10, 2005 at 03:14:30PM -0400, Richard A Steenbergen wrote:
| As it was described to me, the nhdb L2 descriptor size is hard coded as a
| percentage of your DRAM. On a 64MB DRAM model, this comes out to just over
| 50k:
thats not correct; - L2Des size is entirely dep. on I/O Manager ASIC
chip revision plus I/O Manager ASIC SRAM;
your example shows a I/O manager ASIC version 2.0 with 1MB of SRAM
for example an I/O Manager ASIC version 3.0 with 2MB of SRAM would
give you 162816 L2Des;
/hannes
| SFM2(xxx.xxx vty)# show nhdb zones
| Chip Start Size Rsvd Used/Hi Water/Total Size Name
| ---- ----- ----- ----- -------------------- ---- ----
| 0 20000 01000 00000 0/0/512 8 Multicast RTP
| 0 21000 02400 00000 0/0/9216 1 Multicast Lists
| 0 23400 04400 00006 176/180/17408 1 Next-Hop Entries
| 0 27800 18800 0004b 856/885/50176 2 L2 Descriptors
| ^^^^^^^^^^^^^
More information about the juniper-nsp
mailing list