[j-nsp] cRTP between Juniper M40e(PE) & Cisco (CPE's)

[Erdem Sener]

Hello,

 Although I've never tried it, it seems so :)

http://www.juniper.net/techpubs/software/junos/junos72/swconfig72-interfaces/html/interfaces-adaptive-services-config2.html#1024738
(check for wrap)

On 5/23/05, Hemant Narkhede <hemantn at houstontechnologies.com> wrote:
> 
> Hi Erdem,
> 
> Does it means that if I have JUNOS version 7.0R1.5 along with Adaptive
> Services PIC II, I can use CRTP between Cisco(iphc header) & Juniper (IETF
> header)? According to me both side should have same header compression
> technique.
> 
> Hemant Narkhede
> 
> 
> -----Original Message-----
> From: Erdem Sener [mailto:erdems at gmail.com]
> Sent: Sunday, May 22, 2005 9:38 PM
> To: hemantn at houstontechnologies.com
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] cRTP between Juniper M40e(PE) & Cisco (CPE's)
> 
> Hi,
> 
>  for cRTP, you'll need an AS-PIC (or AS-PIC II which only differs by
> supported throughput) and JunOS higher than 7.1, if I'm not mistaken.
> 
>  Cheers,
>  Erdem
> 
> On 5/22/05, Hemant Narkhede <hemantn at houstontechnologies.com> wrote:
> > Hi Guys,
> >
> > I am trying to configure cRTP ( IP header compression ) between Juniper
> M-series & Cisco routers.
> >
> > Can I use iphc-header compression on Cisco & Juniper. But according to my
> knowledge Juniper supports only ietf.
> >
> > We can't change Cisco since thousdands of customer connected to that.
> > So if cRTP would work then either we have to change Cisco IOS ( so
> > that it supoorts IETF ) or change Juniper JUNOS version ( which
> > supports iphc-header)
> >
> > So what will be the workaround for this ?
> >
> > Hemant
> >
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> 
> --
> 
> -erdem
> 
> 
> 
> 


-- 

-erdem