[j-nsp] advertising direct routes in a vrf

Harshit Kumar harshit at juniper.net
Tue May 24 18:08:05 EDT 2005


I think vlans is your problem. There is one more
 solution: vt interface (but only if you have a tunnel or asp pic).

http://www.juniper.net/techpubs/software/junos/junos56/swconfig56-interf
aces/html/interfaces-tunnel-config5.html 

Harshit


> -----Original Message-----
> From: Ezequiel Carson [mailto:ezequiel at ifxnw.com.ar] 
> Sent: Tuesday, May 24, 2005 2:58 PM
> To: Harshit Kumar
> Cc: Juniper list
> Subject: RE: [j-nsp] advertising direct routes in a vrf
> 
> Harshit,
> 	
>  	I've added the vrf-table-label but it didnt work :(. Is 
> there any
> workaround instead of adding a single /32 static route per aRP entry?
> 
> Thanks
> Ezequiel
> 
> 
> On Tue, 2005-05-24 at 14:44, Harshit Kumar wrote:
> > This is basically to facilitate ARP on multi-access 
> interfaces (fe/ge).
> >  after popping vrf-label at PE. Depending on what kind of 
> core interface
> >  you have, you can possibly use vrf-table-label instead.
> > 
> > 
> http://www.juniper.net/techpubs/software/junos/junos72/swconfi
> g72-vpns/h
> > tml/vpnl3-config25.html#1072807
> > 
> > Harshit
> >  
> > 
> > > -----Original Message-----
> > > From: juniper-nsp-bounces at puck.nether.net 
> > > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> > > Ezequiel Carson
> > > Sent: Tuesday, May 24, 2005 11:28 AM
> > > To: Juniper list
> > > Subject: [j-nsp] advertising direct routes in a vrf
> > > 
> > > Hi List,
> > > 
> > > 	Im configuring a l3vpn and i found that i have to add 
> > > static routes
> > > /32s in order to  be able to ping from one CE to anothe CE.
> > > 
> > > 	Example.
> > > 
> > > 	
> > > 	ge-1/0/0.1505
> > > 	vlan-id 1505;
> > > 		family inet {
> > >     			address 10.14.120.1/24;
> > > 	}
> > > 
> > > 	The only way that another CE can reach my hsot 10.14.120.10 or
> > > 10.14.120.4 is adding static routes in the routing-instance
> > > configuration.
> > > show configuration routing-instances IFX-MGMT
> > > instance-type vrf;
> > > interface ge-1/0/0.1505;
> > > route-distinguisher 1111:999000005;
> > > vrf-targ\et target:1111:999000005;
> > > routing-options {
> > >     static {
> > >         route 10.14.120.4/32 next-hop 10.14.120.4;
> > >         route 10.14.120.10/32 next-hop 10.14.120.10;
> > >     }
> > > }
> > > 
> > > 
> > > Is there any problem with my configuration?
> > > 
> > > thanks
> > > Ezequiel
> > > 
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > > 
> > 
> 



More information about the juniper-nsp mailing list