[j-nsp] about ARP

[Harry Reynolds]

Common to see duplicate address detection when a device first activates. Normally done by ARP-ing one's own address. This part sounds normal.

HTHs
 

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> zeng watchthinker
> Sent: Wednesday, May 25, 2005 9:36 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] about ARP
> 
> I found a strange problem when testing GE interoperate 
> between 2 routes.
> 
> Our side GE is flapping. When mirrored and capture some 
> packets, it always generate ARP request for its own IP 
> address(!?) What will be the cause of this problem? It seems 
> not real but it do happen
> 
> _________________________________________________________________
> 享用世界上最大的电子邮件系统― MSN Hotmail。 http://www.hotmail.com 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>