[j-nsp] Is it possible to assign two different interface on the
Eric Shih (TP/ERT)
eric.shih at ericsson.com
Tue May 31 12:46:22 EDT 2005
I just define two vlans on two different physical interface (ge-0/1/0 & ge-1/3/0) in M20.
These two vlans shares the same vlan id and all belong to the same subnet. And also I enable
ospf protocol on these two interface. When I commit, there are some warning as below.
Does someone have any idea of it ? Is there any potential problem to assign two different
interface(vlan) to the same subnet on the same node ?
root at TPM20# commit
[edit interfaces ge-1/3/0 unit 100 family inet]
warning: identical subnet 10.254.11.120/25 is found on ge-0/3/0
[edit interfaces ge-1/3/0 unit 200 family inet]
warning: identical subnet 10.252.14.4/27 is found on ge-0/3/0
[edit interfaces ge-1/3/0 unit 210 family inet]
warning: identical subnet 10.252.13.132/27 is found on ge-0/3/0
More information about the juniper-nsp