[j-nsp] Junos upgrade 7.0R2.7->7.3R2.9 on M5 and a problem with
auto negotiation on 12xFE pic
Richmond, Jeff (ELI)
jeff_richmond at eli.net
Mon Nov 7 10:42:29 EST 2005
Not sure if it is a bug or not, but setting fixed on one side and auto on the other is never a good idea. I know it is convenient, but more often than not, you'll find that it causes more problems than it solves, unfortunately.
Good luck,
-Jeff
-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of
dmitri at nominet.org.uk
Sent: Monday, November 07, 2005 6:58 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Junos upgrade 7.0R2.7->7.3R2.9 on M5 and a problem with
auto negotiation on 12xFE pic
Hi,
I just tried to upgrade Junos on M5 from 7.0R2.7 to 7.3R2.9 and
encountered a problem. We have some devices connected to 12xFE pic which
only can do 10M half-duplex. With any Junos up to 7.0 we hadn't had any
problems with them and M5 always auto-negotiated half-dulex and 10M. Now,
after upgrading to 7.3R2.9, phisical links with these devices stay down
unless I explicitly set the interfaces on M5 to 10M and half-duplex. I
haven't found anything about it in Release Notes.
Has anyone encountered it? Is it a bug? Below is our hardware
configuration.
Thanks
Dmitri
show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis 50434 M5
Midplane REV 03 710-002650 HF1461 M5 Backplane
Power Supply A Rev 04 740-002497 LK23061 AC Power Supply
Power Supply B Rev 04 740-002497 LK23063 AC Power Supply
Display REV 04 710-001995 HF1167 M10 Display Board
Routing Engine REV 06 740-003239 9000006978 RE-2.0
FEB REV 09 710-002503 HF1641 Internet
Processor IIv1
FPC 0 FPC
PIC 1 REV 04 750-004176 AV1687 12x FE, 100
BASE-TX
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list