[j-nsp] loss of keep alive

[Harry Reynolds]

As I understand, loss of KA configures the ability switch when KAs are
lost, while KA time defines how much time can pass w/o a KA before the
RE assumes it is not going to receive one.

As such, I feel both are needed.


HTHs
 

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> jjsyed at aol.com
> Sent: Tuesday, November 08, 2005 7:08 AM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] loss of keep alive
> 
> HI,
>  
>  I was wondering if you can shed some light on our two 
> configuration option for RE redundancy. 
> Keepalive-time and loss of keepalive
>  
> They essentially are the same thing. so do I need to 
> configure  both or just either one.
>  
> thanks in advance 
>  
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>