[j-nsp] Checking GRE tunnels on M-20

[Harshit Kumar]

Status -> show interfaces terse gr*  , all "up"'s tell you if everything
Is good.

Statistics-> show interfaces statistics gr-x/y/z.w detail

HTHs
Harshit


> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Arpit Mittal (GR/EIL)
> Sent: Wednesday, November 09, 2005 9:28 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Checking GRE tunnels on M-20
> 
> Hi,
> 
> I am using a M-20 router with Services PIC, and creating GRE tunnels.
> I want to check the state of the tunnel and the statistics of 
> the same.
> 
> Does anyone know how can I see them.
> 
> Here is the config done :-
> 
> interfaces {
>     gr-0/0/0 {
>         unit 0 {
>             description "GRE Tunnel #1";
>             tunnel {
>                 source 192.168.1.9;
>                 destination 192.168.15.53;
>             }
>             family inet {
>                 address 192.168.210.2/30;
>             }
>             family mpls;
>         }
> 
> 
> 
> Regards,
> Arpit Mittal
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>