[j-nsp] Booting from alternate media

[InterXS - L. Croese]

Hi Javier,

try "request system snapshot" and then "request system reboot", it should 
boot from the flash disk then.

Leon

----- Original Message ----- 
From: "Javier Gallardo Córdova" <jagc64 at yahoo.com>
To: <juniper-nsp at puck.nether.net>
Sent: Wednesday, November 23, 2005 4:32 PM
Subject: [j-nsp] Booting from alternate media


Hi,

  We had a M10 router without access from console port or telnet. As a 
remedy to get access, the router was turned off and on. After to do this, 
router boot fro alternate media (HD) instead of flash drive.
  There are two alarm presents:
  Alarm time               Class  Description
2005-11-22 17:58:11 CST  Major  compact-flash missing in Boot List
2005-11-22 17:58:08 CST  Minor  Boot from alternate media

  Reviewing at messages lod, I find the next lines since more of ten days 
ago:
    Nov 9 21:15:44 MEXSJCTIJA /kernel: ad0: read interrupt arrived early
  Nov 9 21:15:44 MEXSJCTIJA /kernel: ad0: read error detected (too) late
  Nov 9 21:15:44 MEXSJCTIJA /kernel: ad0 removed from the Boot List
  Nov 9 21:15:45 MEXSJCTIJA alarmd[2293]: Alarm set: RE color=YELLOW, 
class=CHASSIS, reason=compact-flash drive error
  Nov 9 21:15:50 MEXSJCTIJA feb CM: ALARM SET: (Minor) Slot 0: compact-flash 
drive error

  Nov 11 21:35:59 MEXSJCTIJA /kernel: ad0: timeout waiting for DRQ
  Nov 11 21:35:59 MEXSJCTIJA /kernel: - resetting
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ad0: enabling readahead cache failed
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0-master: timeout waiting to give 
command=ef s=d0 e=04
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ad0: enabling write cache failed
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0-master: timeout waiting to give 
command=ef s=d0 e=04
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0-slave: timeout waiting to give 
command=c6 s=d0 e=04
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ad1: set multi features failed
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0-slave: timeout waiting to give 
command=ef s=d0 e=04
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ad1: enabling readahead cache failed
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0-slave: timeout waiting to give 
command=ef s=d0 e=04
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ad1: enabling write cache failed
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0-slave: DMA limited to UDMA33
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0-slave: timeout waiting to give 
command=ef s=d0 e=04
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0-slave: timeout waiting to give 
command=ef s=d0 e=04
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ad0: timeout waiting for DRQ
  Nov 11 21:35:59 MEXSJCTIJA /kernel: - resetting
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0: resetting devices ..
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ata0: Finished resetting devices .. 
(after 1 seconds)
  Nov 11 21:35:59 MEXSJCTIJA /kernel: ad0: timeout waiting for DRQ
  Nov 22 17:20:15 MEXSJCTIJA /kernel: ad0: not attached, missing in Boot 
List

  Do you know how can do extensive hardware tests over flash drive in order 
to diagnose if it have a uncorrectable  HW failure?. And, how reincorporate 
flash drive to boot list?.

  Thanks and regards.
  //Javier


__________________________________________________
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
Regístrate ya - http://correo.espanol.yahoo.com/
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp