[j-nsp] l3vpn

[Dan Martin]

You can take a single physical link and configure multiple subinterfaces
on that link, like Ethernet vlans or frame relay dlcis, and give each
one of those membership in a particular vrf.  E.g. t1-0/0/3.100, .200,
.300

Having multiple vrfs on the same subinterface would defeat the notion of
private though.  E.g. eth-0/0/1.0



-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Nabarun Baks
Sent: Wednesday, October 19, 2005 10:43 AM
To: jnsp
Subject: [j-nsp] l3vpn

Hi All,

I have a basic l3vpn configuration question.

Can we configure multiple vrfs for a single interface?

Regards
Nabarun
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp