[j-nsp] l2circuit between vlan-ccc and ethernet-ccc

[Richard A Steenbergen]

How the heck do you set up an l2circuit between a vlan-ccc interface (.1q 
tagged on the handoff) on one end, and a ethernet-ccc handoff (not .1q 
tagged) on the other end? If you just configure it like normal you get 
EM/encapsulation mismatch on the l2circuit, but since the .1q tag is not 
included in the actual payload put on the LSP, they should actually be the 
same packet internally yes? Doesn't seem to be an issue covered in any 
documentation. :)

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)