[j-nsp] l2circuit between vlan-ccc and ethernet-ccc

[Doug Marschke]

Check out family tcc on the interfaces.

Doug

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of sthaug at nethelp.no
Sent: Friday, October 28, 2005 1:01 PM
To: ras at e-gerbil.net
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] l2circuit between vlan-ccc and ethernet-ccc

> How the heck do you set up an l2circuit between a vlan-ccc interface (.1q 
> tagged on the handoff) on one end, and a ethernet-ccc handoff (not .1q 
> tagged) on the other end? If you just configure it like normal you get 
> EM/encapsulation mismatch on the l2circuit, but since the .1q tag is not 
> included in the actual payload put on the LSP, they should actually be the

> same packet internally yes?

Um, why do you think the .1q tag is not put on the LSP for the vlan-ccc
interface? As far as I know it is.

You may be able to get around this by using a vlan-map with an explicit
pop/push operation (haven't tried it though).

Steinar Haug, Nethelp consulting, sthaug at nethelp.no
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp