[j-nsp] Juniper/Cisco and Aggregated Ethernet

[Antonio Del Bianco]

Erdem, Jee,

according to ieee802.3ad specs, link aggregation is supported
only with MAC operating in full duplex and then JunOS leaves the
option to choose the required link speed of the contributing links.
Note: all links must operate at the same speed in the bundle.

<<--
[edit interfaces ae0]
antonio at gasherbrum1# set aggregated-ether-options link-speed ?
Possible completions:
  100m                 Links are 100M
  10g                  Links are 10G
  1g                   Links are 1G


Regards
Antonio