[j-nsp] bgp, can not advertising my network

[Radu Pavaloiu]

Sorry, my mistake the prefix needs only to be active in routing table:

Try: " show route advertising-protocol bgp 195.175.x.y "
The output is generated after the policy POLICY10 is applied. So the prefix
193.m.l.0/24 must to be in the output if the config is correct.

Next, on the peer router try: " show route receive-protocol bgp "ip addr of
the first router"" 
The output is generated before to apply an input policy. ( so the output
will be similar to the first one - you will have 193.m.l.0/24 )
And next try to look for 193.m.l.0/24 in routing table on the peer router.
If does not exist try to look for a input policy.

Kindest Regards,   

Radu Pavaloiu
CCIE #14582, JNCIA-M, JNCIS-M
Technical Support Manager
Dynamic Networks - Juniper Networks Business Partner
 
Grant Center, 25-27 Chiscani Str., District 1, Bucharest 012241
Tel: +4.021.201.79.64
Fax: +4.021.222.16.50
www.juniper.net

-----Original Message-----
From: Erol KAHRAMAN [mailto:erol.kahraman at gmail.com] 
Sent: Tuesday, September 13, 2005 3:22 PM
To: Radu Pavaloiu
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] bgp, can not advertising my network

i set T10 as follow but again i can't send my route advertise  .

Router1> show configuration policy-options
policy-statement POLICY10 {
    term T10 {
        from {
            protocol static;
            route-filter 193.m.l.0/24 exact;
        }
        then accept;


On 9/13/05, Radu Pavaloiu <radu.pavaloiu at dynamicnetworks.ro> wrote:
> Hi,
> 
> In term T10 you need a statement like this:
> 
> " set from protocol static "
> 
> Kindest Regards,
> 
> Radu Pavaloiu
> CCIE #14582, JNCIA-M, JNCIS-M
> Technical Support Manager
> Dynamic Networks - Juniper Networks Business Partner
> 
> Grant Center, 25-27 Chiscani Str., District 1, Bucharest 012241
> Tel: +4.021.201.79.64
> Fax: +4.021.222.16.50
> www.juniper.net
> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Erol KAHRAMAN
> Sent: Tuesday, September 13, 2005 2:43 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] bgp, can not advertising my network
> 
> hi to everybody,
> 
> I have a M7i router which has F/R connection to a ISP. My
> configuration is as follow:
> 
> ETH ----(193.m.l.0/27)---- Router1 ----(195.175.x.0/30)---- WAN
> 
> Router1> show configuration protocols bgp
> group NET_BAGLANTISI {
>     type external;
>     export POLICY10;
>     peer-as abc;
>     neighbor 195.175.x.y;
> }
> 
> Router1> show configuration policy-options
> policy-statement POLICY10 {
>     term T10 {
>         from {
>             route-filter 193.m.l.0/24 exact;
>         }
>         then accept;
>     }
> }
> 
> Router1> show route table inet.0 protocol static
> 193.m.l.0/24    *[Static/5] 00:25:54
>                     > to 193.140.71.1 via ge-0/0/0.0
> 
> Router1> show route table inet.0 protocol direct
> 193.m.l.0/27    *[Direct/0] 00:26:00
>                     > via ge-0/0/0.0
> 
> I have second router with the same configuration which can get an BGP
> routes. But i have trouble with this one. I also can't advertising my
> route to my neighbour, which i thing is my first problem. Do you see
> any problem with this configuration ?
> --
> Erol KAHRAMAN
> System Network Administrator
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 


-- 
Erol KAHRAMAN
System Network Administrator