[j-nsp] bgp, can not advertising my network

[Erol KAHRAMAN]

Router1> show route table inet.0 193.m.l.0/24 exact extensive

inet.0: 19 destinations, 19 routes (18 active, 0 holddown, 1 hidden)
193.m.l.0/24 (1 entry, 1 announced)
TSI:
KRT in-kernel 193.m.l.0/24 -> {193.m.l.1}
        *Static Preference: 5
                Next-hop reference count: 19
                Next hop: 193.m.l.1 via ge-0/0/0.0, selected
                State: <Active Int Ext>
                Local AS: cba
                Age: 2:16:43
                Task: RT
                Announcement bits (1): 0-KRT
                AS path: I


On 9/13/05, Sorin CONSTANTINESCU <consta at gmail.com> wrote:
> Could you run
> 
> "show route table inet.0 193.m.l.0/24 exact extensive"?
> 
> Regards,
> 
> On 9/13/05, Erol KAHRAMAN <erol.kahraman at gmail.com> wrote:
> > on my output of
> > " show route advertising-protocol bgp 195.175.x.y " command i get nothing.
> > So that is what i am try to explain :)
> >
> > Router1> show configuration routing-options
> > static {
> > route 193.m.l.0/24 next-hop 193.m.l.1;  /*193.m.l.1 is my FW*/
> > .
> > }
> >
> > peer router is not in my control so i can't check for incomming advertisings.
> >
> > On 9/13/05, Radu Pavaloiu <radu.pavaloiu at dynamicnetworks.ro> wrote:
> > > Sorry, my mistake the prefix needs only to be active in routing table:
> > >
> > > Try: " show route advertising-protocol bgp 195.175.x.y "
> > > The output is generated after the policy POLICY10 is applied. So the prefix
> > > 193.m.l.0/24 must to be in the output if the config is correct.
> > >
> > > Next, on the peer router try: " show route receive-protocol bgp "ip addr of
> > > the first router""
> > > The output is generated before to apply an input policy. ( so the output
> > > will be similar to the first one - you will have 193.m.l.0/24 )
> > > And next try to look for 193.m.l.0/24 in routing table on the peer router.
> > > If does not exist try to look for a input policy.
> > >
> > > Kindest Regards,
> > >
> > > Radu Pavaloiu
> > > CCIE #14582, JNCIA-M, JNCIS-M
> > > Technical Support Manager
> > > Dynamic Networks - Juniper Networks Business Partner
> > >
> > > Grant Center, 25-27 Chiscani Str., District 1, Bucharest 012241
> > > Tel: +4.021.201.79.64
> > > Fax: +4.021.222.16.50
> > > www.juniper.net
> > >
> > > -----Original Message-----
> > > From: Erol KAHRAMAN [mailto:erol.kahraman at gmail.com]
> > > Sent: Tuesday, September 13, 2005 3:22 PM
> > > To: Radu Pavaloiu
> > > Cc: juniper-nsp at puck.nether.net
> > > Subject: Re: [j-nsp] bgp, can not advertising my network
> > >
> > > i set T10 as follow but again i can't send my route advertise  .
> > >
> > > Router1> show configuration policy-options
> > > policy-statement POLICY10 {
> > >     term T10 {
> > >         from {
> > >             protocol static;
> > >             route-filter 193.m.l.0/24 exact;
> > >         }
> > >         then accept;
> > >
> > >
> > > On 9/13/05, Radu Pavaloiu <radu.pavaloiu at dynamicnetworks.ro> wrote:
> > > > Hi,
> > > >
> > > > In term T10 you need a statement like this:
> > > >
> > > > " set from protocol static "
> > > >
> > > > Kindest Regards,
> > > >
> > > > Radu Pavaloiu
> > > > CCIE #14582, JNCIA-M, JNCIS-M
> > > > Technical Support Manager
> > > > Dynamic Networks - Juniper Networks Business Partner
> > > >
> > > > Grant Center, 25-27 Chiscani Str., District 1, Bucharest 012241
> > > > Tel: +4.021.201.79.64
> > > > Fax: +4.021.222.16.50
> > > > www.juniper.net
> > > > -----Original Message-----
> > > > From: juniper-nsp-bounces at puck.nether.net
> > > > [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Erol KAHRAMAN
> > > > Sent: Tuesday, September 13, 2005 2:43 PM
> > > > To: juniper-nsp at puck.nether.net
> > > > Subject: [j-nsp] bgp, can not advertising my network
> > > >
> > > > hi to everybody,
> > > >
> > > > I have a M7i router which has F/R connection to a ISP. My
> > > > configuration is as follow:
> > > >
> > > > ETH ----(193.m.l.0/27)---- Router1 ----(195.175.x.0/30)---- WAN
> > > >
> > > > Router1> show configuration protocols bgp
> > > > group NET_BAGLANTISI {
> > > >     type external;
> > > >     export POLICY10;
> > > >     peer-as abc;
> > > >     neighbor 195.175.x.y;
> > > > }
> > > >
> > > > Router1> show configuration policy-options
> > > > policy-statement POLICY10 {
> > > >     term T10 {
> > > >         from {
> > > >             route-filter 193.m.l.0/24 exact;
> > > >         }
> > > >         then accept;
> > > >     }
> > > > }
> > > >
> > > > Router1> show route table inet.0 protocol static
> > > > 193.m.l.0/24    *[Static/5] 00:25:54
> > > >                     > to 193.140.71.1 via ge-0/0/0.0
> > > >
> > > > Router1> show route table inet.0 protocol direct
> > > > 193.m.l.0/27    *[Direct/0] 00:26:00
> > > >                     > via ge-0/0/0.0
> > > >
> > > > I have second router with the same configuration which can get an BGP
> > > > routes. But i have trouble with this one. I also can't advertising my
> > > > route to my neighbour, which i thing is my first problem. Do you see
> > > > any problem with this configuration ?
> > > > --
> > > > Erol KAHRAMAN
> > > > System Network Administrator
> > > >
> > > > _______________________________________________
> > > > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > > > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > > >
> > > >
> > >
> > >
> > > --
> > > Erol KAHRAMAN
> > > System Network Administrator
> > >
> > >
> >
> >
> > --
> > Erol KAHRAMAN
> > System Network Administrator
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> 
> --
> Sorin CONSTANTINESCU
> Cisco CCNP / JNCIA #845
> consta at gmail.com
> 


-- 
Erol KAHRAMAN
System Network Administrator