[j-nsp] load balancing between multiple BGP links

[Rafal Szarecki (WA/EPO)]

Yes, if you configure. in forwarding option load balancing policy to per-packet.

By default (factory config) JUNIPER do PER DESTINATION PREFIX. load ballancing.

Rafa³ Jan Szarecki JNCIE #136

Skype: callto://Rafal_Szarecki <callto://Rafal_Szarecki/> 


> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net]On Behalf Of Sabri Berisha
> Sent: Wednesday, September 14, 2005 3:03 PM
> To: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] load balancing between multiple BGP links
> 
> 
> On Wed, Sep 14, 2005 at 05:53:54AM -0700, Robert Raszuk wrote:
>  
> Hi,
> 
> > One advice I could add (since cisco-nsp mail alias has been 
> cc-ed :)) is
> > to use src-dst based hashing (cisco default) rather then just
> > destination based one.
> 
> The IP2 implements microflow based loadbalancing; it's not just
> destination based.
> 
> Thanks,
> 
> -- 
> Sabri Berisha,
> Juniper Certified - JNCIA #747	| Cisco Certified - CCNA
> email: sabri at cluecentral.net	| cell: +31 6 19890416
> http://www.cluecentral.net/	| http://www.virt-ix.net/
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>