[j-nsp] load balancing between multiple BGP links

[Alok]

It isnt juniper in my case though but I just remebered the per packet thing
when I ran into this with another vendor

however, even link bandwidth via BGP , which i perhaps remember has been
there since 5.6 doesnt consider the "immediate util" at the time of
transmitting the packet....

Perhaps "per packet" with BGP link bandwidth would be good infact  i think..
.
or perhaps for flow based, flow setup based on "actual util at the time of
setup".... though nothing still seems to beat per packet :-) with link
bandwidth i guess...


----- Original Message ----- 
From: "Rafal Szarecki (WA/EPO)" <rafal.szarecki at ericsson.com>
To: "Alok" <alokdube at hotpop.com>
Sent: Wednesday, September 14, 2005 7:01 PM
Subject: RE: [j-nsp] load balancing between multiple BGP links


Alok,

>
> EBGP multihop between them over 2 links
> link 1 =10Mbps
> link 2 = 20 Mbps
>
> total traffic = 25Mbps

Perpetum mobile? Or statistics inacuracy.

> Is there a way to ensure that link 1 doesnt get choked?

- Bgp multipath is simpler to run.
- Is it Juniper? If the pleas check forwarding option to identyfy
loadbalancing hash alghoritm.
http://www.juniper.net/techpubs/software/junos/junos73/swconfig73-policy/html/policy-actions-config13.html#1021911

Rafa³ Szarecki JNCIE

skype me <callto://Rafal_Szarecki/>