[j-nsp] BGP error "no spooling requested"

Paul Goyette pgoyette at juniper.net
Tue Dec 12 11:56:46 EST 2006


> i've got a problem with getting 2 simple BGP sessions running. They
> actually open fine, exchange some routes and then die and the whole
> thing starts again.
> 
> Errors are the same on both ends:
> 
> Dec 12 17:41:41  ams1-edge rpd[2704]: bgp_send: sending 19 bytes to
> x.x.x.x (Internal AS 29686) blocked (no spooling requested): Resource
> temporarily unavailable
> Dec 12 17:41:41  ams1-edge rpd[2704]: bgp_traffic_timeout: 
> error sending
> KEEPALIVE to x.x.x.x (Internal AS 29686): Resource temporarily
> unavailable
> Dec 12 17:41:41  ams1-edge rpd[2704]: bgp_event: peer x.x.x.x 
> (Internal
> AS 29686) old state Established event TransportError new state Idle
> 
> I havent been able to find a PR matching on anything like spooling,
> anyone ever observed this error before?

Sounds to me like the TCP session is wedged.  Take a tcpdump
and check out the sequence numbers.  Or, look at the output
of "show system connections extensive"...



More information about the juniper-nsp mailing list