[j-nsp] Netflow feature for Juniper ?

[Farhan Jaffer]

Many thanks to all your reply .

It's running now, under the same config i have posted. I made a bit mistake
in the netflow tool.
Now for the next ques, any comments??
I want to run accounting feature on the same M7i.

Regards
Farhan Jaffer

On 12/16/06, Farhan Jaffer <bandhani at gmail.com> wrote:
>
>  I want to configure netflow on Juniper M7i having Junos version 7.6R1.10,
> just like ip flow-export & ip route-cache flow (related) commands in Cisco
> IOS. Also i like to enable cache flow or ip accounting on any fast ethernet
> interface when needed.
> Kindly help me to solve this.
>
> I have configured router for netflow feature using these command, but it
> didn't work
>
> interfaces {
>     fe-0/3/0 {
>         unit 0 {
>             family inet {
>                 filter {
>                     input all;
>                     output all;
>                 }
>                 address 10.0.0.1/24;
>             }
>         }
>     }
>
> firewall {
>     filter all {
>         term all {
>             then {
>                 sample;
>                 accept;
>             }
>         }
>     }
> }
>
> forwarding-options {
>     sampling {
>         input {
>             family inet {
>                 rate 100;
>             }
>         }
>         output {
>             cflowd 10.0.0.100 {
>                 port 9800;
>                 version 5;
>             }
>         }
>     }
> }
>
> Any comments ??
>
> Thanks in advance.
>
> --
> Regards,
> Farhan Jaffer
>
>