[j-nsp] Graph customer traffic using firewall filter counter

[Rafal Szarecki (WA/EPO)]

Optionally, You can write statistical information to files on RE, and
then ftping them to off-line analysis.

Rafal 

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Thomas Salmen
> Sent: Wednesday, February 01, 2006 3:01 AM
> To: 'Elian Scrosoppi'; juniper-nsp at puck.nether.net
> Subject: RE: [j-nsp] Graph customer traffic using firewall 
> filter counter
> 
> 
> http://net.doit.wisc.edu/~plonka/junipoll/
> 
> Firewall oids are in the archives somewhere (and in the above 
> script, for that matter).
> 
> /t
> 
> > 
> > Hi Guys,
> > 
> > Can anybody help me to graph customer traffic with some 
> SNMP+rrdtool 
> > utility (like cacti or mrtg) using a counter in a firewall filter 
> > based in this configuration?:
> > 
> > --
> > escrosoppi at xxx> show configuration firewall filter A 
> > interface-specific; term 1 {
> >     from {
> >           blablabla;
> >     }
> >     then {
> >         policer 6mb;
> >         count COUNTER1;
> >         accept;
> >     }
> > }
> > term 2 {
> >     from {
> >           blablabla;
> >     }
> >     then {
> >         policer 4mb;
> >         count COUNTER2;
> >         accept;
> >     }
> > }
> > 
> > Is this posible?
> > 
> > Thanks in advance,
> > --
> > Elian Scrosoppi
> > escrosoppi at ifxcorp.com
> > 
> > 
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net 
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>