[j-nsp] Need the command for juniperM40e

[Dan.Caldwell at teliasonera.com]

 Hi Vinay,

after the command, just add "| no-more" - this will turn off paging the
output.

-Dan

> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of vinay pit
> Sent: Friday, February 10, 2006 12:19 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] Need the command for juniperM40e
> 
> Dear all
> 
> Can u plz tell me the command for juniper which is similar to 
> "term length 0" which will display the entire output in 
> juniper router with out giving more option...
> 
> I am working on a script in TCL and it takes the output fron 
> the juniper box and extracts some values to a xls file. When 
> the script runs it stops at more in the output of the juniper 
> sh command.
> 
> the output stops as follows...
>     Packets              :              32278807      
>               0 pps
>     Packets              :              32278807      
>               0 pps
>     Tail-dropped packets :                     0      
>               0 pps
> ---(more)--
> 
> 
> Regards
> Vinay
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection 
> around http://mail.yahoo.com 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>