[j-nsp] Question [MPLS | BGP | OSPF] on MAC OS X

[Scott Weeks]

I don't see other replies to this, so I'll ask...  Are you
asking "how do I read the router configuration" or "how do I
do commands?"  You'll find answers to all this at
juniper.net/techpubs.  Here are a couple to get you started:

router> show bgp summary
router> show route terse
router> show ospf route

To see how it was configured do this:

router> configure
router# show | display set

I hope that helps...
scott

----- Original Message Follows -----
From: Frank Paulsen <sysmailunix at yahoo.de>
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Question [MPLS | BGP | OSPF] on MAC OS X
Date: Tue, 14 Feb 2006 13:59:44 +0100

> Hello NG,
> 
> i search some information about [MPLS | BGP | OSPF] on a
> "FreeBsd" system (Darwin) MAC OS X.
> I have a ibook and switch on a Juniper m7i Ethernet Port
> and read out the [MPLS | BGP | OSPF] information.
> 
> Thanks fpr help
> 
> Frank
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp