[j-nsp] Rib groups

[Arpit Mittal (GR/EIL)]

Hi Piyush,

As per the default behaviour of BGP all the routes are placed in
Local-rib and in order to segregate the routes of different vrf's and
hence leaking routes, we use rib-groups.

This can also be achieved using policies, but depends on the design you
have made.


Regards,
Arpit Mittal 
Engineer 
Ericsson India Private Limited.
Tel : +91 124 256 08 08 / +91 124 508 08 08
Fax: +91 124 256 54 54
Mobile : +91 98713 74801
E-mail :	arpit.mittal at ericsson.com
http://www.ericsson.com 


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Piyush Diwedi
(GR/EIL)
Sent: Wednesday, March 01, 2006 9:40 AM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Rib groups

Hi,
    I have a small GPRS network with 2 M10i routers.
These routers work in redundant fashion.
In the config of the router there are rib-groups configured which are
importing one vrf table to another vrf.
So my question is that if I have to exchange routes between two VRF;s is
rib-groups only a way out.
Kindly reply 

Regards
Piyush Dwivedi

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp