SV: [j-nsp] Re: Implementation of TACACS+

[Peder Christian Bach]

Hi..


Take a look at this..

http://www.juniper.net/techpubs/software/junos/junos57/swconfig57-getting-started/html/sys-mgmt-authentication3.html


This doc describe login templates good..

http://www.cymru.com/gillsr/documents/junos-radius-authentication.htm




- Peder


-----Opprinnelig melding-----
Fra: juniper-nsp-bounces at puck.nether.net [mailto:juniper-nsp-bounces at puck.nether.net] På vegne av Kanagaraj Krishna
Sendt: 11. januar 2006 10:51
Til: juniper-nsp at puck.nether.net
Emne: [j-nsp] Re: Implementation of TACACS+ 

I've been implementing TACACS+ based authentication on Cisco routers. This is the first setting it up on a Juniper m7i. I have a few questions:

- How do we implement TACAS+ authentication only for telnet access only OR console access only?
- In Cisco the sequence for authentication can be specified using aaa command (tacacs, local login, enable.... etc). How is it done on a Juniper?
- What happens if a specified tacacs is not reachable?

Regards,
Kanagaraj Krishna
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp