[j-nsp] 'monitor interface traffic'-like feature for firewallcounters

[Doug Marschke]

See this page:

http://www.juniper.net/techpubs/software/junos/junos71/swconfig71-net-mgmt/h
tml/accounting-config18.html

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Aviva Garrett
Sent: Wednesday, January 18, 2006 2:33 PM
To: Jonathan Disher
Cc: juniper-nsp at puck.nether.net; aviva at juniper.net
Subject: Re: [j-nsp] 'monitor interface traffic'-like feature for
firewallcounters 

One possibility is to log the counters and then view the logs with the
"monitor start <filename>" command. Use "monitor stop" to end.

..Aviva

In message <1A75127F251D334DB12B6E4C0F41D34C95613A at min.macrovision.com>you
write
:
> Is there a feature somewhere to watch firewall counters in realtime in
> JunOS?  Alternately, is there an SNMP OID to retreive counter values for
> graphing?
> 
> Thanks!
> 
> -j
> 
>  
> -- 
> --Jonathan Disher, Senior Systems and Network Engineer
> --Macrovision Corporation, Santa Clara, CA
> --[w] +1.408.562.8524 | [m] +1.408.829.2956 | [e]
> jdisher at macrovision.com
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp